Tappwater

Shower filter Diamond

Protect your skin and hair with the ShowerPro Diamond shower filter, the advanced filtration solution for cleaner, healthier water. With high-performance technology, this filter ensures optimal flow while removing impurities, delivering a revitalizing shower experience. European design combines quality and efficiency.

€54,90 EUR

On sale Sold out

Taxes included Delivery calculated at the end

Choose Filter with 1 refill / 6 months Filter with 2 refill / 12 months

View full details

Nanofiltration

A purification process that removes particles, chemical contaminants, and microorganisms from water.

Polypropylene mesh

Captures large particles and some microorganisms.

Carbon block – mechanical filtration

Removes all particles larger than 1–2 microns, including microplastics, rust, and bacteria.

Activated carbon – chemical adsorption

Adsorbs nano-contaminants such as chlorine, pesticides, herbicides, PFAS, and pharmaceutical residues.

Anti-limescale technology (polyphosphates)

Prevents limescale from building up and sticking to surfaces.

Compare our filters with others

	Tappwater Filters	Other Filters
Low annual cost
Filters over 100 contaminants
Reduces limescale by 80% or more
Flow rate 4 L/min – twice as high as competitors
85% less plastic

Frequently asked questions about the ShowerPro Diamond filter

How do I know if it’s working?

Chlorine in shower water often dries out the skin and hair. For people with sensitive skin, it can also cause irritation. The filter removes most of the chlorine, so over time the skin and hair become softer and healthier.

The filter also reduces limescale buildup on tiles and glass surfaces. This is usually noticeable within a few weeks.

ShowerPro Diamond makes shower water clean, clear, and free from unwanted substances.

Why should I replace the filter every 6 months?

ShowerPro Diamond has a capacity of approximately 8,000–12,000 liters, depending on water quality. After this period, the filter material is depleted and can no longer absorb chlorine and other substances.

Keep in mind that service life may vary depending on the number of people in the household.

Does the ShowerPro Diamond need to be cleaned?

Cleaning the filter is not required. If you still want to clean it or limescale has built up on the housing, you can use water and vinegar.

Important: the refill (filter) cannot be washed, so remove it before cleaning the exterior.

How often should I replace my filter?

We recommend to replace the refill every 6 months. This will guarantee the quality of the filtered water.

We emphasize on the fact that one of the filter's layer contains activated carbon. As with any other filter containing activated carbon, performance naturally decreases over time. If left for too long, even without using, it can be a breeding ground for microorganisms. Changing your cartridge or capsule regularly is important.

Shower filter Diamond